Overview
The Wenxing IP1 is a positioning ring for vertical key duplicating machines. It is set once: with the milling cutter and key guide adjusted parallel against the vise, the ring is seated against the bottom of the cutter and its screw is tightened. After that, cutters and guides can be swapped without recalibrating the depth each time. Wenxing lists it as suitable for all types of vertical duplicating machines.
- Type: positioning (leveling) ring
- Set once; then swap cutters and guides without recalibration
- Listed for all types of vertical duplicating machines
中文說明
Wenxing IP1 是立式配匙機使用的定位環。只需設定一次：先把銑刀與導針對準夾具調至平行，再把定位環貼緊刀具底部並收緊螺絲。之後更換刀具或導針時，毋須每次重新校準深度。廠方列明適用於各類立式配匙機。
- 類別：定位（校平）環
- 設定一次後，更換刀具及導針毋須重新校準
- 廠方列明適用於各類立式配匙機
Reviews
There are no reviews yet.